What is a heat pump?
A heat pump is a device meant for your home for heating purpose. Heat pumps, used for heating purpose need be chosen correctly for which it can be used properly. So choosing the most efficient is the right choice.
Heat pumps are the best method for using electricity to heat your homes. Heat pumps are the most efficient source, both for heating and cooling modes. Some heat pumps tend to struggle to keep between 0 and 5°C, so they may be prone to icing up
Some check points for choosing the right heat pump for your homes
* Insulation- one needs to make sure that your ceiling as well as the under floor are insulated. Then you would require a smaller heat pump which would be cheaper. * Environmental concerns- choose the device as per the environment of the area. For instance, the geothermal areas or coastal areas may have the heat pump requiring protection against corrosion. * Installing the heat pump- good installation should be ensured so that the device performs well. * Quality- choosing a good quality brand is important. Now you should buy a device which offers a good warranty and performance. This would be determined by the quality of the brand you choose. * Sizing- makes sure you size the pump correctly for the room. Else, if too big or small, it would prove to be over effective or ineffective. * Climate- when temperature drops, so does the performance of the heat pump, so make sure that the pump device is sized using on how much heat it can deliver at the average temp in the cold area. For this you need to select a quality device. A good quality unit should be able to perform efficiently till minus 15°C.
Energy rating-understand the number heat pumps have energy ratings. Now there are two types of ratings. To select the one as per your choice, you need to understand which one means what. * The capacity rating or output- this will tell you about the heating or cooling, you would get from the heat pump. * The power output-the amount of electricity that the heat pump would use, to produce cool or hot air.
How to use the heat pump efficiently?
Some added points to ensure maximum efficiency of heat pumps-
* Only heat the space required and not more. * Always shut the doors and then use the device * Timer features should be used. * Clean filters regularly. * Avoid using it as an air conditioner. * Do not leave the pump on the whole day if you are not there. * Learn to switch it on and off properly. * Use the heater size calculator to know how much heat doe your room require and use it accordingly.
When you take these steps seriously, even a moderate quality device can last long and would give you maximum performance.
Author Bio
The author of this article is associated with Global Energy Systems and write various articles related to Heat Pumps UK and its benefits.
For More Information Visit Our Official Site :- http://www.globalenergysystems.co.uk/air-source-heat-pumps/how-it-works
|