Building Up a House from the Ground – A Short Guide |
Posted: December 13, 2018 |
While there are certain aspects of building a home that you may manage quite successfully, you still have to understand the process in depth and only afterwards decide which are those tasks that you are able to manage yourself. In this guide, you will find the basics and the timeline that you have to follow to masterfully tackle those building aspects that you can but also organize the entire process like a professional, on a budget. The Pros and Cons of Being Your Own General ConstructorThere are many pros and cons of being your own contractor as you will observe below.
But let’s see what being your own GC does involve as long as you have your house plans arranged by a professional architect. Take care of the construction siteBefore starting to call sub-contractors, you have to carefully assess your construction site. Not only take a glance at it but actually cleaning it carefully. Follow the guidelines and steps below if you want to successfully tackle this first step in your construction process.
The FoundationFrom now on, things will get serious. The expenses will increase but so will the labour. This can be exclusively tackled by excavation contractors and foundation experts. As much as you would like to handle this on your own, it’s virtually impossible. The foundation and footings are one of the biggest parts and steps of building a home and there is no turning point after you jumpstart this step. If you stop after this step, you will be losing plenty of money and selling the property with only your footings and foundation are built will be extremely difficult. Plumbing and Electrical LinesYou have to bring in some plumbers and electricians to rough in some services before you start pouring the concrete slab. The plumbers will take care of all the pipes that must be laid down before your concrete covers them. The electricians will run through the concrete slab by using metal conduits and will create the necessary connections for your future circuits. Pouring the concrete slabNow that you have all your electrical system and plumbing in place, it’s just about time to consider hiring a team to help you with your concrete slab. For a house slab, the contractor will most likely install the slab foam board insulation first. A gravel base will also be installed, which will be the base for the concrete. For concrete, make sure that the team invests in high-quality one, suitable for a variety of projects, from domestic to commercial projects. This will assure you that your slab will be sturdy and lasting. However, before your concrete is in place, a plastic vapour barrier will be installed, followed by a wire mesh reinforcement. Usually, you will have to bring a separate company to help you with this step, as a high skill level is necessary. Here’s what will happen, step-by-step, in this phase.
Framing, Siding and RoofingThese will be the last steps of your entire construction journey. Make sure to find a trustworthy team of framing carpenters that will make your house look more like one. now the lumber framework for the floor will be done as well as the one for your walls, ceilings. The team will afterwards move to the sheathing, siding and roofing installation. This process can be remarkably fast if you hire the right contractors. Now, your house will start looking like a house. These are the steps that you will have to follow if you aim to be your own general contractor and save plenty of money in the process. You will thank yourself later, as you will be able to furnish most of the house later, with the money saved now. However, make sure to pick reliable contractors and high-quality materials.
|
||||||||||||||||||||||||||||||||||||||||||
|